A description of the tent
发布时间：2017-05-18
作者：admin
浏览量：187
14px;font-family:Arial;">Fabrics: more for polyester pongee fabric, the generally available in the market for 210 t 190 t polyester taffeta, polyester pongee, quality on the basis of their thickness and warp/weft density, technical indicators will be subject to the degree of waterproof waterproof fabrics. There are also manufacturers to enhance the sense of beauty, the feeling of the hand, the silicone gel on the external ledger, the feeling of translucent, and more importantly, the tent will be light.
14px;font-family:Arial;">Waterproof is only the appearance of AC or PU. This is just for children or game books.
14px;font-family:Arial;">Waterproof 300MM is commonly used in the beach account/shading account or the cotton tent of dry and little rain water is used for the traditional simple camping type tent.
14px;font-family:Arial;">Waterproof 1500MM - 2000MM to compare medium to the tent, need travel many days.
14px;font-family:Arial;">Waterproof 3000MM above general is professional tent, adopt the technique of high temperature/cold and cold wait for the technology to handle.
14px;font-family:Arial;">Bottom material: the general use of PE is the most common, the quality is good and good depends on its thickness and the latitude and longitude density. Better compare high-grade to use Oxford fabrics, waterproof processing is at least in
14px;font-family:Arial;">More than 1500 mm.
14px;font-family:Arial;">The inner fabric is usually breathable nylon or breathable cotton. Quality depends on its density.
14px;font-family:Arial;">The waterproof performance of the outside tent cloth is still calculated according to the water column of mm per square centimeter.
14px;font-family:Arial;">The general tent rain water is above the water column of 1500mm. Individual has reached 3000-4000mm, can prevent continuous heavy rain.
14px;font-family:Arial;">The quality of the waterproof cover cloth, not only the rain gauge is high, but also in the cover of the cover of the cover of the cover, there is also the thickness of the pressure tape, which is seepage water in the seam of the line of defense.
14px;font-family:Arial;">Although the outer tent is high in the rain gauge, it is a problem. Even if it is a rainy, sunny night, the tent is covered with water droplets in the outside of the tent, especially on the wet, damp ground, such as grass. The accumulation of more and more will drip into the account. On the other hand, the water-proof indicator is low, and the water in the inner surface is less than the rain.
14px;font-family:Arial;">This is the water vapor that the occupant breathes in the tent, and the steam on the ground gathers water on the inside of the tarp. Because of the rain outside the tent, the rain is not coming in, and the water vapor is not coming. So when you get up in the morning, try to avoid shaking your tent, and watch out for the rain.
14px;font-family:Arial;">Outside the tent, but there are a few top account used GORE - TEX, BANTEX such as waterproof, breathable material can be a good solution to this problem, just the price is expensive. Support the skeleton
14px;font-family:Arial;">There are four common supporting skeletons (called tent poles) :
14px;font-family:Arial;">1, steel pipes, also known as high-frequency welded pipe, mainly used in military tents, relief tents, tents, have plastic spraying or galvanized processing surface, circular tube and square tube, pipe diameter generally ranging from 19 to 50 mm, wall thickness in the range 0.8 ~ 3 mm.
14px;font-family:Arial;">Elastic: this is usually a child's account or a beach game.
14px;font-family:Arial;">Fiberglass rod: 6.9/7.9/8.5/9.5/11/12.5. The stronger the rigidity, the weaker the softness. So the stent selection of the fibertube is determined by the size and height of the ground and the thickness is easily broken. For example, 210 * 210 * 130 is the classic size, typically 7.9 or 8.5. 4, aluminum alloy frame: to compare the high-grade, according to the alloy ratio test is more difficult, in general the original the radian curve, support are calculated first and then hot pressing shapes. The characteristic is light carry convenience mainly still not easy to fold, but the quality is not easy to bend deformation.
14px;font-family:Arial;">Waterproof is only the appearance of AC or PU. This is just for children or game books.
14px;font-family:Arial;">Waterproof 300MM is commonly used in the beach account/shading account or the cotton tent of dry and little rain water is used for the traditional simple camping type tent.
14px;font-family:Arial;">Waterproof 1500MM - 2000MM to compare medium to the tent, need travel many days.
14px;font-family:Arial;">Waterproof 3000MM above general is professional tent, adopt the technique of high temperature/cold and cold wait for the technology to handle.
14px;font-family:Arial;">Bottom material: the general use of PE is the most common, the quality is good and good depends on its thickness and the latitude and longitude density. Better compare high-grade to use Oxford fabrics, waterproof processing is at least in
14px;font-family:Arial;">More than 1500 mm.
14px;font-family:Arial;">The inner fabric is usually breathable nylon or breathable cotton. Quality depends on its density.
14px;font-family:Arial;">The waterproof performance of the outside tent cloth is still calculated according to the water column of mm per square centimeter.
14px;font-family:Arial;">The general tent rain water is above the water column of 1500mm. Individual has reached 3000-4000mm, can prevent continuous heavy rain.
14px;font-family:Arial;">The quality of the waterproof cover cloth, not only the rain gauge is high, but also in the cover of the cover of the cover of the cover, there is also the thickness of the pressure tape, which is seepage water in the seam of the line of defense.
14px;font-family:Arial;">Although the outer tent is high in the rain gauge, it is a problem. Even if it is a rainy, sunny night, the tent is covered with water droplets in the outside of the tent, especially on the wet, damp ground, such as grass. The accumulation of more and more will drip into the account. On the other hand, the water-proof indicator is low, and the water in the inner surface is less than the rain.
14px;font-family:Arial;">This is the water vapor that the occupant breathes in the tent, and the steam on the ground gathers water on the inside of the tarp. Because of the rain outside the tent, the rain is not coming in, and the water vapor is not coming. So when you get up in the morning, try to avoid shaking your tent, and watch out for the rain.
14px;font-family:Arial;">Outside the tent, but there are a few top account used GORE - TEX, BANTEX such as waterproof, breathable material can be a good solution to this problem, just the price is expensive. Support the skeleton
14px;font-family:Arial;">There are four common supporting skeletons (called tent poles) :
14px;font-family:Arial;">1, steel pipes, also known as high-frequency welded pipe, mainly used in military tents, relief tents, tents, have plastic spraying or galvanized processing surface, circular tube and square tube, pipe diameter generally ranging from 19 to 50 mm, wall thickness in the range 0.8 ~ 3 mm.
14px;font-family:Arial;">Elastic: this is usually a child's account or a beach game.
14px;font-family:Arial;">Fiberglass rod: 6.9/7.9/8.5/9.5/11/12.5. The stronger the rigidity, the weaker the softness. So the stent selection of the fibertube is determined by the size and height of the ground and the thickness is easily broken. For example, 210 * 210 * 130 is the classic size, typically 7.9 or 8.5. 4, aluminum alloy frame: to compare the high-grade, according to the alloy ratio test is more difficult, in general the original the radian curve, support are calculated first and then hot pressing shapes. The characteristic is light carry convenience mainly still not easy to fold, but the quality is not easy to bend deformation.
